Price on Request
 
[Torque] 9.1（7.4V）/ 10.1（8.4V）kg・cm
[Speed] 0.10（7.4V）/ 0.09（8.4V）Sec/60°
[size] 30×10×30mm
[weight] 25.5g / 0.9oz
[wire length] 127mm / 5 inch
[operation voltage] 6V-8.4V
 
neutral：1500μS
■XBUS 2kHz/PWM 333Hz
■programmable Neutral, endpoint,gain etc(Works with PWM XBUS)120°150°180°(Works with PWM XBUS)Synchronize(Works with PWM XBUS)
■Super steel full metal gear(Gear B brass)
■Wide valtage
■ upperl ball bearing (10x6) bottom(10x6)
■Special desigen creless motor
■coreless motor
■full metal gear
■full metal case
■angle setting：120°/180°（150° can be set by XBUS SERVO PROGRAMMER）
 
Operating angle, housing shape, and performance parameters can be adjusted or customized according to your application needs. Please feel free to contact us for tailored solutions.
 
Important Notes on Using Our Servos
Our servos are programmed to operate with high precision and sensitivity.
Because of this, if there are any obstructions within the servo’s range of motion and it is unable to move as commanded by the transmitter, the servo may experience excessive load. This can result in damage to the internal circuit board due to overheating.
When installing the servo for throttle, aileron, or other control surfaces, please make sure to leave a small amount of free play between the servo travel range and the mechanical movement range. This helps prevent any binding or overloading of the servo.